Operation of engine JAMZ JAMZ engines are powerful and economical engines. Reliable and easy to use. However, we must remember that life is largely dependent on careful and regular care. Slingbox does not necessarily agree. The requirements to be followed to protect your engine from damage, and yourself from further repair and purchase of spare parts JAMZ. 1.
Correct operation of the motor and long term egosluzhby are in direct Depending on the culture of exploitation, so it is necessary to conduct vnimatelnootnositsya all maintenance work. 2. During the break-in of the new engine is running-JAMZ its friction surfaces, so Further efficiency in the engine depends largely on how well respected the rules of running a new engine. 3. Lubrication of the engine made in accordance with the 'grease table. " The use of lubricants materials, not specified in the table are not allowed! 4. Coolant temperature of the engine should be in the range 75-100 'C. 5.
Not dopuskaetsya sharp increase speed immediately after cold start engine as the thickened oil slowly comes to the crankshaft bearings and a large number of revolutions can be displayed Bearing izstroya. 6. When operating the engine JAMZ monitor oil pressure in the system lubrication oil pressure drop below 300 kPa (3.0 kgf / cm) at rated engine speed malfunction in the lubrication system or increased wear of bearings crankshaft. 7. When tightening the nuts CHT strictly maintain the frequency izadanny torque. Zatazhka nuts moentom large or small, will lead to a breach of containment seals and gaskets burnout, especially since the leakage of water or oil in this way can not be repaired. 8. To avoid breakage categorically zapreschaetsya include starter at running or unstoppable engine. 9. On engines use filter elements having a certificate conformity issued by the respective centers of the certification and admission to their application, issued by OAO Autodiesel 'manufacturers.